专线网关 - 错误码
| HTTP 状态码 | 错误码 | 错误信息 | 描述 | 操作 |
|---|---|---|---|---|
| 400 | The allowed route prefixes [%s] is conflict. | 当前配置的路由前缀已存在，请确认后重新提交。 | 诊断 | |
| 400 | ASN already used by other ECR. | 指定的ASN被其它专线网关占用，请换成其它未使用的ASN。 | 诊断 | |
| 400 | ASN already used by other VBR. | 当前VBR BgpGroup localAsn与ECR asn不一致，请调整一致后重新绑定。 | 诊断 | |
| 400 | There are other unfinished operations. | 您当前有其他未完成的操作，请稍后重试 | 诊断 | |
| 400 | The access device where the VBR is located does not support configuring a switching group. | VBR所处的接入设备不支持配置倒换组。 | 诊断 | |
| 400 | A private network instance cannot be bound to a forwarding router instance at the same time. | 专有网络实例与转发路由器实例无法同时绑定，请调整后选择其中一个实例进行绑定 | 诊断 | |
| 400 | The param of %s is illegal. | 参数非法 | 诊断 | |
| 400 | The entered Bgp Asn is incorrect. | 当前输入的BgpAsn不正确，请检查后重新输入 | 诊断 | |
| 400 | The Ecr instance account parameter is invalid. | 该专线网关实例账号为非法参数，请核对后重新输入 | 诊断 | |
| 400 | Specified parameter InstanceOwnerId is not valid. | 该实例账号为非法参数，请核对后重新输入 | 诊断 | |
| 400 | Area parameter invalid. | 区域参数非法 | 诊断 | |
| 400 | The transmission mode parameter is invalid. | 传输模式参数非法 | 诊断 | |
| 400 | The param format of %s is illegal. | 参数格式非法 | 诊断 | |
| 400 | The prefix parameter format is invalid. Procedure. | 指定的前缀路由网段格式错误。 | 诊断 | |
| 400 | The format of the entered Cen instance ID is incorrect. | 当前输入的Cen实例ID格式不正确 | 诊断 | |
| 400 | The format of the specified destination Cidr route parameter is incorrect. | 您当前指定的目的Cidr路由参数格式错误，请核对后重新输入。 | 诊断 | |
| 400 | The number of prefix routes exceeded the quota. | 您当前输入的前缀路由数量超过配额，请申请扩容。 | 诊断 | |
| 400 | Ecr Status does not allow current operation. | 专线网关实例状态不允许当前操作。目前有其它操作正在执行或者专线网关实例正在被删除，请求稍后再试 | 诊断 | |
| 400 | Ecr Association Status does not allow current operation. | ECR Association实例不允许当前操作。请在进行中的操作完成后，重试 | 诊断 | |
| 400 | The current state of the switching group is not steady state, please try again later. | 当前倒换组状态不为稳态，请稍后重试。 | 诊断 | |
| 400 | The current VBR is not in steady state, please try again later. | 当前VBR不处于稳态，请稍后重试。 | 诊断 | |
| 400 | The param of %s is missing. | 请求参数未填写，请核对对应的参数后重试。 | 诊断 | |
| 400 | Only one forwarding router can be bound to an area. | 当前操作被拒绝，专线网关实例在同一区域内只支持绑定一个转发路由器 | 诊断 | |
| 400 | If the forwarding router is bound to another account, perform this operation on the same account. | 当前操作被拒绝，绑定其他账号转发路由器时，需在该账号做此操作 | 诊断 | |
| 400 | Unbind cross-account. | 当前操作被拒绝，需在跨账号页面解除绑定操作后再执行此操作 | 诊断 | |
| 400 | Cross-border binding of resources is subject to compliance constraints. | 您当前的绑定资源涉及跨中国站点资源和海外站点资源互通，受限于合规约束请联系您的商务经理沟通处理。 | 诊断 | |
| 400 | Ecr and TR have been linked. | 当前操作被拒绝，专线网关实例与TR已建立链接，请解除后再执行此操作。 | 诊断 | |
| 400 | The current instance is being deleted. | 您当前操作被拒绝，专线网关实例正在被强制删除，请稍后再试 | 诊断 | |
| 400 | Invalid virtual border router status. | 无效的边界路由器状态，请确认边界路由器状态正常后重试。 | 诊断 | |
| 400 | The node owner is not authorized. | 您当前操作被拒绝，专线网关产品未授权 | 诊断 | |
| 400 | VBR has already attached to CEN. | 边界路由器已经绑定了云企业网, 请先将边界路由器从云企业网中删除后重试。 | 诊断 | |
| 400 | VBR has already attached to ECR. | 边界路由器已经关联了专线网关，先将边界路由器从专线网关中删除后重试。 | 诊断 | |
| 400 | The VBR does not support Mpbgp configuration. | 操作被拒绝，VBR暂不支持Mpbgp, | 诊断 | |
| 400 | The operation is not allowed because of VBR has BGP group in middle status. | 当前操作无法正常执行，边界路由器中存在BGP组处于配置生效中，请等待生效后重试。 | 诊断 | |
| 400 | The operation is not allowed because of VBR has route entry in middle status. | 当前操作无法正常执行，边界路由器中存在路由条目处于配置生效中，请等待生效后重试。 | 诊断 | |
| 400 | The border router has been used by the switching group and cannot be bound to the leased line gateway. | 卸载失败，边界路由器已关联倒换组。卸载前请先解除关联的倒换组。 | 诊断 | |
| 400 | EC Yaochi component returned an error. | 操作失败，内部EC瑶池组件返回错误 | 诊断 | |
| 400 | The system is abnormal. Please try again later. | 操作失败，系统内部异常，请稍后重试，若重试仍失败请联系您的商务经理获取帮助。 | 诊断 | |
| 400 | The Cdt cross-border transmission function is disabled. | 当前操作失败，未开启阿里云数据跨境传输功能 | 诊断 | |
| 400 | The Cdt function is disabled. | 当前操作失败，未开启阿里云数据传输功能 | 诊断 | |
| 400 | There is no qualification for creating cross-border links. | 操作失败，当前企业不具备创建跨境链路权限，请联系您的商务经理添加此权限。 | 诊断 | |
| 400 | Switching groups cannot be formed across account sub-instances. | 不支持跨账号子实例形成倒换组。 | 诊断 | |
| 400 | Switching groups cannot be formed across regional sub-instances. | 不支持跨地域子实例形成倒换组。 | 诊断 | |
| 400 | The request was rejected by Ec Yaochi. | 当前操作失败，Ec瑶池拒绝了您的请求 | 诊断 | |
| 400 | Vpc Yaochi has rejected your current request. | 操作失败,Vpc瑶池拒绝了您当前请求 | 诊断 | |
| 400 | The VPC also has a static route pointing to the ECR, and it is not allowed to disassociate the ECR. | VPC还有静态路由指向ECR，不允许解除关联 ECR | 诊断 | |
| 400 | The current user is not in the whitelist. | 专线网关产品通过白名单开放，当前用户没有操作权限。请联系客服人员将当前用户添加至白名单。 | 诊断 | |
| 400 | The VBR on the same access device cannot be added to a switching group. | 处于同一台接入设备的VBR不能加入到一个倒换组中。 | 诊断 | |
| 400 | The BGP group AS number of the VBR configuration in the switching group is not supported. | 倒换组中的VBR配置的BGP组AS号不支持。 | 诊断 | |
| 400 | The AS number of the BGP group of the VBR added to the switching group is different from the AS number of the ECR. | 加入倒换组中的VBR的BGP组的AS号和ECR的AS号不相同。 | 诊断 |