HTTP 状态码错误码错误信息描述操作
400
AccountNotExisted
Your account is not existed.你的账号不存在诊断
400
AdminStopSLRFail
The administrator account is prohibited from closing the service without completely removing the aggregators.在未完全删除账号组的情况下，禁止管理员账户关闭服务。诊断
400
AggregatorAccountExceedMaxCount
The maximum number of aggregator account is exceeded.账号组内的成员账号数量超出限制。诊断
400
AggregatorAccountListDuplicated
The aggregator account list is duplicated.存在相同成员账号的账号组。诊断
400
AggregatorAccountListItemDuplicated
The aggregator account list item is duplicated.账号组内的成员账号重复。诊断
400
AggregatorAlreadyPending
The aggregator has a pending operation and cannot be updated.如果账号组的状态非“创建完成”，不能被更新。诊断
400
AggregatorExceedMaxCount
The maximum number of aggregator is exceeded.创建的账号组数量超出限制。诊断
400
AggregatorNameDuplicated
The aggregator name is duplicated.账号组名称重复。诊断
400
CompliancePackAlreadyPending
The compliance pack has a pending operation and cannot be updated.如果合规包状态非“正常”，不能被更新。诊断
400
CompliancePackCopyLimit
The number of replication compliance packages must be less or equal than 5.合规包的复制数量必须小于等于5诊断
400
CompliancePackExists
The compliance pack already exists.合规包名称重复。诊断
400
ConfigExceedMaxQuotaCount
Exceed max quota, need to modify in quota center .配额超限，需要至配额中心修改诊断
400
ConfigRuleCopyLimit
The number of replication config rule must be less or equal than 100.复制规则的数量限制必须小于等于100诊断
400
ConfigRuleNotExists
The ConfigRule does not exist.此规则不存在。诊断
400
ConfigRulePendingCanNotUpdate
ConfigRule is pending and cannot be updated.当前规则有正在执行的操作，不能被更新。诊断
400
ConfigRuleReportCreating
The config rule report is being created.规则的合规报告正在创建中。诊断
400
ConfigRuleStatusNotActive
The ConfigRule is inactive.此规则处于停用状态。诊断
400
ConfigRuleStatusNotActive
The status of the config rule is not active.当前规则不是启用状态。诊断
400
ConfigRuleStatusNotInActive
The status of the config rule is not inactive.当前规则不是停用状态。诊断
400
DeliveryChannelAccountNotSupport
Cross-account delivery that is not in the RD is not supported.暂不支持非资源目录内的跨账号投递。诊断
400
DeliveryChannelMnsUnreachable
The MNS topic is unreachable.MNS Topic尝试投递失败。诊断
400
DeliveryChannelNotExists
The delivery channel does not exist.投递渠道不存在。诊断
400
DeliveryChannelOssUnreachable
The OSS bucket is unreachable.OSS Bucket尝试投递失败。诊断
400
DeliveryChannelTargetAlreadyUsed
Delivery channel target already used.目标投递渠道已经使用诊断
400
EnterpriseEditionAllResourceTypesDefault
The Enterprise Edition monitor all resource types by default.企业版配置审计默认监控全部资源类型。诊断
400
ExistsChannelResourcesInAggregator
Exists some channel resources in the aggregator.账号组内存在一些渠道规则诊断
400
IntegratedDeliveryNotSupported
Current integrated delivery channels only support delivering content NonCompliantNotification via cms or eventbridge.当前集成服务多账号投递仅支持通过云监控或者事件总线投递不合规事件诊断
400
Invalid.AccountType.Value
The specified AccountType is invalid.账号来源类型不符合要求。诊断
400
Invalid.AggregatorAccounts.Empty
You must specify AggregatorAccounts.账号组内的成员账号列表不能为空。诊断
400
Invalid.AggregatorAccounts.SizeExceed
The maximum number of AggregatorAccounts is 200.账号组内的成员账号不能超过200个。诊断
400
Invalid.AggregatorAccounts.Value
The specified AggregatorAccounts is invalid.账号组内成员账号信息错误。诊断
400
Invalid.AggregatorId.Value
The specified AggregatorId is invalid.账号组ID不存在或无权限使用该账号组。诊断
400
Invalid.AggregatorIds.Empty
You must specify AggregatorIds.账号组ID列表不能为空。诊断
400
Invalid.AggregatorIds.SizeExceed
The maximum number of AggregatorIds is 5.账号组ID不能超过5个。诊断
400
Invalid.Api.Value
Specified Api value is not valid.指定的Api参数无效。诊断
400
Invalid.Arn.Format
Your ARN is not in the correct format.您的 ARN 格式不正确。诊断
400
Invalid.AssumeRoleArn.Empty
You must specify AssumeRoleArn.AssumeroleArn参数不能为空。诊断
400
Invalid.AssumeRoleArn.Format
The specified format of AssumeRoleArn is invalid.AssumeRoleArn参数格式有误。诊断
400
Invalid.ClientToken.Value
Your ClientToken field value is not valid.您的 ClientToken 字段值无效。诊断
400
Invalid.CompliancePackId.Value
The specified CompliancePackId does not exist.合规包ID不存在。诊断
400
Invalid.CompliancePackIds.SizeExceed
The maximum number of CompliancePackIds is 5.合规包ID不能超过5个。诊断
400
Invalid.CompliancePackName.Empty
You must specify CompliancePackName.合规包名称不能为空。诊断
400
Invalid.CompliancePackName.Value
The specified CompliancePackName is invalid.合规包名称格式不符合要求。诊断
400
Invalid.CompliancePackTemplateId.Value
The specified CompliancePackTemplateId does not exist.合规包模板ID不存在。诊断
400
Invalid.ConfigRuleId.Value
Your ConfigRuleId is incorrect.您填写的 ConfigRuleId 值不正确。诊断
400
Invalid.ConfigRuleIds.SizeExceed
The maximum number of ConfigRuleIds cannot exceed 20.输入的规则ID不能超过20个。诊断
400
Invalid.ConfigRules.Value
The specified ConfigRules is invalid.合规包规则中参数输入错误。诊断
403
AggregatorMemberNoPermission
The aggregator member is not authorized to perform the operation.账号组内的成员账号无权限执行此操作。诊断
404
ConfigServiceNotEnabled
The Cloud Config service is not activated.配置审计服务未开通诊断
500
CreateSLRFail
Failed to create SLR.创建角色失败。诊断
  • 1
  • 2
  • 50 条/页